Downloads

• Pinecone Swiss Pinion All-purpose Coffee Grinder - Product Sheet

• Pinecone Swiss Pinion All-purpose Coffee Grinder - User Manual EN

• Pinecone Swiss Pinion All-purpose Coffee Grinder - User Manual ES

BEFORE INITIAL OPERATION

Functioning and basic settings The grinder features a removable bean hopper that is locked into place and unlocked by a turnable ring towards its bottom . In order to install the bean hopper the ring needs to be placed into “unlock” position. Upon placing the hopper into the grinder neck and turning the ring to “locked” position, the bean hopper will secure safely in place and the bean shutter will open.

The grinder may be used to grind into portafilters (if the portafilter support module is installed ) or into the dosing cup or other containers (if the dosing cup support platform is installed ). Grinding operation can be turned on and off via the main switch located on the back of the grinder or via the on demand button beneath the portafilter holder on the front of the grinder. If the On/Off switch is engaged in position “I”, grinding operation is controlled via the on-demand button. On/Off switch position “II” turns on the grinding operation permanently for as long as switch position “II” is engaged.

RISK OF DAMAGE

• Take care while opening the grinder packaging with a sharp knife or other pointed objects, otherwise the grinder may be damaged.

• Remove the grinder from the packaging.

• Validate that the delivery scope is complete

• Check for damage to the grinder or to its individual parts: if is damage is detectable, do not use the grinder and contact your supplier.

• NOTE: please note that each grinder is subjected to a function test before delivery and the residues of coffee powder my be present in the griding chamber.

Setting up the grinder and inserting the bean hopper

1. Place the grinder on a level and stable surface.

2. Make sure the grinder is switched off (On/Off switch in middle position 0) and connect the grinder to the mains by inserting the mains plug in a properly installed earthed socket.

3. Ensure the spout is pushed up to the maximum and is securely locked in the spout locking mechanism.

4. Insert the drip tray in the corresponding housing recess underneath the spout.

5. Insert the dosing cup holder platform into the recess in the main column. To use a portafilter, follow section “setting up the portafilter”.

6. Set the bean hopper locking ring to “unlocked” and place the bean hopper on the bean hopper intake.

7. When placing the bean hopper, make sure to place the nose of the hopper into the corresponding recess of the bean hopper intake on the top of the grinder.

8. Push the bean hopper down into the bean hopper intake and turn the bean hopper locking ring to “locked” position to fix it to the grinder and to open the bean shutter. If the bean hopper cannot be fixed in place, it may not be positioned correctly, or the locking ring may be set to the “locked” position.

Maintenance

• Grinding discs should be replaced after grinding ca. 800 kgs of whole roasted coffee beans. The grinding volume until replacement depends on grind size, roast degree, bean type and condition of the grinding discs.

• Wear gloves when changing the grinding discs to avoid injury.

• Recalibrate your grind size after replacing or changing the grinding discs.

• The flapper should be replaced if it is porous, deformed or very dirty

Details

• All-purpose grinder suitable for both espresso and filter coffee recipes.

• A simple dial to adjust grind sizes, from a finer grind size to a coarser grind size.

• Compact footprint & high output.

• Has a motor protector, which switches off the grinder when the motor becomes too hot.

Technical Specs

• Voltage // frequencies:

  • 120V // 60 Hz // 510 W // 4.7 A

  • 230V // 50 Hz // 450 W // 2.1 A

  Idle speed: 3.100 rpm 
  Burr diameter: 65 mm
  Burr material: Steel
  Average grinding capacity*: 5-6 g/sec
  Bean hopper capacity: 600 g
  Dimensions (w x h x d): 150 x 245 x 450 mm
  Dimensions of packing (w x h x d): 400 x 350 x 200 mm
  Net weight: 5.5 kg
  Gross weight: 6 kg
  Certifications: CE, CB, CCC, ETL, KC, NSF, PSE, RCM

  Standard colors:

  • Black

  Special Equipment (included)

  • Portafilter holder dosing cup